Category: tools

Learn about the importance of Wood Lathe

Wood lathes are machines that are used to carve wood into anyone’s desired shape or size; they can range from making a simple dovetail to making bowls or spindles and other decorative carvings or wooden items. In this machine, there is a spinning arm to which a piece of wood is attached, and the wood spins while it is shaped and sized with a variety of different tools. Wood lathes were discovered long back in history, as early as in Egyptian times when their most basic forms were used. They used to be in the form of bow lathes and rope spinners before they became the wood lathes they are today.

Importance of Lathe Machines

The lathe has always been of tremendous importance to the development of civilization. From the simplest wood lathe, many other types of lathes have been developed that are used for metalworking, pottery-making, glass-working, and spinning. The lathe was used in the production of wheels and making parts for many types of furniture and tableware, parts for mills and pumps, jewelry-making, and many other important technological developments.

What Wood Lathes Are Used For

Modern lathes consist of usually one spindle and a tailstock to attach the wood that is to be spun around. Different tools like chisels, tail-rest, and other such varieties are then used to shape the wood into the desired form. You can give it any shape and size it to any size of your choosing. What else you can do is, hollow out the piece of wood to form items like vessels, cups, vases, and other beautiful decorative items. If you know how to use a wood carving lathe machine right, there is a lot you can get out of it.

Advantages of Lathe Machines

These machines are a huge time-saver because they largely cut down on the amount of time it takes to make intricate carvings out of wood like vessels, cups, vases, and other items. Carving wood with a lathe machine assures higher quality and accuracy. Flawless finishes that cannot be achieved by hand-carving can be achieved when using a wood lathe machine to do the job.

Be Aware of the Following before Using a Lathe

  • The spinning parts of the machine can be highly dangerous for inexperienced individuals, or even if you are a little careless while working on them. You have to maintain extreme caution while working with a lathe.
  • Do now wear clothes that are loosely fitted or have hanging parts, so that they don’t have the probability of getting caught in the machine. Also, make sure that the wood is tightly fixed to the spinning part of the machine.
  • A tool you are using can be sent off flying across space if it comes in contact with the spinner, so be very careful of how you are positioning your tool against the lathe and also how you are positioning yourself near the wood lathe machine.
  • Learn thoroughly, how to use the machine before going near it. Wear steel-toed shoes/boots, dust mask, and safety glasses while working on a lathe machine.

Lathe machines can come in handy if you know how to use them right!

What a Wood Planer is & How it Works:

It is often frustrating to order custom thickness of boards from local suppliers of wood. Although table saws can be used to decrease board thickness, then have a jointer clean the edges. But all this hassle can be avoided using a wood planer. Let’s take a look at how these work and in what ways they can be used.

Wood planers are tools used for woodworking that are used for producing even thickness in boards. Traditional wood planers used to be handheld tools, but the modern ones are equipped with a platform to enable quickness and accuracy while planing. These can be either manually controlled or electrically.

First off, the desired cut depth is set by either making adjustments to the cutter head or the platform. Then the machine is switched on. As the board is fed into the planer, the in-feed roller carries it forward while the spinning blades of the drum are seizing it. The sized board comes out of the out-feed roller, making the process of achieving a smooth and sized board, effortless.

Uses of Planers:

Using a wood thickness planer, one can convert irregular wooden pieces into leveled ones as their project requires. This allows people to purchase good quality, but uneven wood from any lumberyard, and then level the wood as well as achieve a certain thickness with the help of a planer. Planers can be helpful for projects that need two edges joined together adjacently. Anyone can do small projects like leveling a door by about 5 degrees, with a little bit of practice. This enables smooth opening and closing of the door with minimal jamming or clicking sounds; the doors have no hinges either.

The flattening feature of wood planers is put to good use when it can even be used to reclaim and revamp old wood. But if you get to talk to a woodwork purist, they will tell you the side-effects of doing this- nicked blades and lost sharpness. Nonetheless, the cost of good quality lumber is growing so fast that recycling old wood seems to be an affordable and cost-effective way to go. And if the same means are only replacing the blades that are carbide-tipped at regular intervals of time, then a lot is saved against the outgoing $30-40!

Training Required for Using a Planer:

Although a wood planer is a great tool to size and smoothen out wooden boards and pieces, it is not everyone’s cup of tea. There can be various things that can go wrong if a novice is using it. Some include tear outs, inclined planes, and snipes on the surface of the board. All this only increases the duration and cost of the project at hand. It is thus, better to know what you’re doing and practice your hand on a few useless and unused boards before moving on to actual projects that are important enough to cost if you mess up.

Factors to be considered while buying Cordless Drill

Cordless drills are power tools that are capable of drilling holes and driving screws. It is a beneficial tool for DIY enthusiasts as well as professionals. These are useful tools for any household and often make great gifts for father’s day! For those who want to buy a cordless drill for their house but don’t know what to look for in one, you’ve come to the right place. Here’s a guide on what factors to consider while buying cordless drills; consider this sort of a buying guide.

  • High voltage

In cordless drilling machines, the more the voltage, the more is the power. Consider what you’ll need them to do while buying a cordless drill. There are light-duty drilling machines available that usually come equipped with a 6V-12V battery that can be used for general household purposes. Medium or general-purpose drills are used for almost all kinds of drilling jobs except the heavy-duty ones; they come with 12V-18V batteries. Heavy-duty ones are used mostly by professionals on construction sites and such other purposes; they contain 18V-24V batteries.

  • Torque

The force that the drill applies on a surface due to its twisting is called its torque. Plastics and such materials are soft and don’t need torque consideration before buying a drill. But for concrete, metal or other hard surfaces, one with higher torque and the lower speed is preferred. For heavy-duty work and drilling, you may want to consider a cordless drill that has a torque of 400+ in-lbs.

  • Brushes

Brushless motors are capable of sensing the resistance to adjust accordingly with the task at hand. This means that the drill will use less power while performing a light job but can draw a larger amount of power while doing a heavy-duty job. This is beneficial because it conserves battery and power usage. These drills are more durable. Compared to brushed motors, these have room to draw more power when needed. They are more useful, more durable, are more efficient and conserve power.

  • Batteries

Look for a place to pop in an extra battery inside you drill because no one wants their tool to die down whilst doing a job! Batteries made of Lithium-ion can run 4 times longer than any regular ones, and their performance is better. Batteries can be powered by using inductive charging points now, which use alternating magnetic fields to serve the purpose. Batteries that change voltage allow the user to run it according to their needs.

  • Speed ranges

There are cordless drills equipped with an ability to control their speeds. 300 RPM is the basic model with a single-speed feature, whereas there are dual speed models that can change between drilling and driving. Moreover, advanced models can also be operated at different speeds.

In addition to all these points, look for drills that have ergonomic or comfortable grips because the grip of your hand on the machine is of utmost importance while working. Good luck with your cordless drill!