Category: tools

All you need to know about tankless water heater

Tankless water heaters, which are also known by the name instantaneous or demand-type water heaters, give hot water if it is needed. They are a good option to save money because they don’t have the standby loss in the energy that is associated with the storage water heater type.

This article will help you to know all there’s about this appliance, ranging from how they work, benefits, and the criteria to consider when buying the right model.

How does a tankless water heater work?

The working of this appliance might seem the opposite of the tank-style water heater because the tankless type heats the water directly with no need for a storage tank. When the tap for hot water is opened, cold water enters the unit through the pipe. Now the unit uses either an electric element or a gas burner to heat the water. Due to this, the delivery of a continuous supply of hot water is possible. The only limitation for the output of hot water is the flow rate.

Benefits of a Tankless Water Heater

Instant Hot Water

One of the noteworthy benefits of this appliance is that any source of water can be converted into hot water on demand. Unlike the conventional tank-style water heater, which is limited in the hot water supply according to the amount of storage in the tank, that is not the issue here. This tankless water heater will easily meet an endless supply of hot water to meet your lifestyle demands.

Lower Energy Bills

Since the units are designed to be highly efficient, heating only when it is required, they help to save about 40% of the energy costs.

Longevity

It can last for more than 20 years, which is twice the longevity of tank-style heaters.

  1. Space Savings

Traditional water heaters require a lot of floor space, whereas the tankless water heaters come in a size of a carry-on suitcase that enables it to be installed anywhere inside or outside the house.

Clean Water

The conventional type has rust and scales built up inside the tank in which hot water is stored. Since no tank is present in a tankless water heater, you will always experience fresh and clean water because it is not stored.

Criteria to select a tankless water heater

Before you buy a tankless water heater, make sure to consider the below factors to make a good decision.

  • Size
  • Costs
  • Energy efficiency
  • Type of fuel and its availability

Installation and maintenance

To optimize the energy efficiency of tankless water heaters, proper installation and maintenance are mandatory.

Many different factors are dependent on proper installation. Some of the factors are climate, fuel type, and safety, especially if the combustion is gas-fired type.

Care must also be taken to do regular maintenance because it can significantly increase the life of the appliance and also decrease the loss of efficiency. Each model of tankless water heater has its unique way of maintenance, so make sure to read the instruction manual carefully that comes with it.

Final thoughts

When compared to the traditional type of tank-style water heaters, it is an irrefutable fact that tankless water heaters are a great choice with long term benefits. Of course, if you are planning to buy it, make sure that the model is according to your needs before investing in it.

Tankless water heater: facts and benefits

Hot water, an essential term almost for every family and house. Whether taking a bath in the cold of winter or washing your clothes in better ways, hot water is useful in several important tasks in our daily life. Water heaters are blessings for everyone. The old methods of heating water take too much time and effort also and in the end, you don’t even get good enough results sometimes. So, undoubtedly water heaters are useful for our daily life. Especially these kinds of water heaters are beneficial for the apartments and community residential plots where a number of families live together.

Why tankless water heaters are better than regular ones

Tankless water heaters are the improvised versions of the previous water heaters. The old regular water heaters used to have tanks to load water. People had to fill the tanks manually and then heat the water. Basically, in the case of those water heaters, people had to supply energy on a 24×7 basis to heat the water. Moreover, the usual tanks don’t work properly after 8-10 years of usage. The tankless heaters have no hassles of tanks or pouring water into the tanks. Usually, the tankless water heaters cost some more money than the regular ones, but these heaters are worth the extra expenses. A tankless water heater saves your efforts of pouring water into the tank. A tankless heater saves up to 50% energy, and that saves a particular amount of money in your electricity bills. In addition to the benefits, there is no chance of leakage as there is no tank.

How a tankless water heaters works

  • First, you have to turn on the hot water tap option.
  • There is a glowing sensor inside the tankless heater. That sensor makes the detection if the water is coming inside or not. Once the sensor detects the incoming water, it sends an immediate signal to the control panel, and the control panel starts producing hot water.
  • The control panel turns on a special kind of fan that allows external air to come inside. The control panel also opens a gas valve inside that ignites the special burner, which is inside.
  • There is a heat exchanger inside the machine. This heat exchanger consumes the heat from the flames and transfers into the water that is passing through the exchanger tubing.
  • There is a temperature sensor that checks the heat limit of passing water and moderates the temperature of the water according to control panel settings.

The minimum price of a tankless water heater is around 7000 rupees, while the maximum price can go up to 80000 rupees. You will get the free installation during the time of purchase, but for further servicing, you need to pay a sum. A tankless water heater can last around 15-20 years. You need to spend a little amount of money every five years for the maintenance of the water heater.

So, it’s evident that a tankless water heater is beneficial from almost every side. Get a tankless water heater for your house or apartment and get the finest benefits of it.

Know about the best whole house water filter system

The whole house water filter system is a type of treatment for purification that cleans water you use in your home. It can clean the water in the main water line. It prevents the type of contaminants in the water from increasing and eliminates it. So you can get purified water from all the taps in your home. This is the best way to get clean water that will keep your family safe from harmful bacteria. You can buy the best whole house water filter system for your home. There are many available. Choose the best whole house water filter system from the list given here.

The Aquasana 10 

This is the maintenance unit containing a 100,000-gallon filtration system for water. It is considered perfect for water filtration. It can assist in removing 97% of the chlorine in the water to provide you with water that is safe for consumption. This can also clean the salt-residues that may form in the water. It eliminates 99% of the percent of the bacteria by utilizing the powerful UV starlight system. Choose this best whole house water filter system for your home.

iSpring WGBB32B 3-stage

This filter unit uses a 1-inch outlet for three gradient filtration systems. It prevents rust, chloride, sediments, herbicides, pesticides and other harmful matters from the water. With this system for purification, you can enjoy the clear water. The filter has a black metal bracket and the filter cartridges.

APEC top tier supreme 

This excellent high-performance water purification system is built for solid cleaning. The water can now be contamination-free because of this system. The water will be free of contaminants such as chloride, fluoride, heavy metals, arsenic etc. The top grade of ultra-pure filter system will offer you the water containing crisp clean taste. The purification system gives you the guarantee of good health.

Express Water Whole House Filter

This best whole house water filter system arrives with a three-stage filter system. It can remove the contaminants from the main water supply. It prevents pesticides, dirt, sand, silt, chloride, total organic compounds, herbicides etc. It is durable and can be used for heavy-duty. The system can be used for dry level places for the water to get protection from freezing temperatures and direct sunlight.

 Woder Water 10K-Gen 3 Ultra Capacity

This system provides the best whole house water filter system. It contains selective filtration technology for removing the matters that contaminate the water. The odour formed in the water and the bad taste can also be taken care of by this filtration system. You do not need to get drinking water separately because the clean water provided by this filtration system will give you purified water fit for drinking.

7. 3M Aqua-Pure Filtration System

This water purification system offers a flow rate of 200 gallons per minute. It is useful for commercial uses and also for home use. The system has a stainless steel head that is non-corrosive. The system can be used commercially because of its low maintenance.

These are the best whole house water filter system which can be used in homes to get purified water free of germs.

Siding Nailers: Top Picks In The Market

Siding nailer, as the name suggests, is designed for installing siding. It is essential to always use a siding nailer for installing siding, not any other kind of nailer. There are so many kinds of siding nailers available in the market that people get confused. Some of the Best Siding Nailers reviewed based on a whole lot of factors have been detailed here.

BOSTITCH N66C-1 Siding Nailer

BOSTITCH N66C-1 uses air pressure of 70-120 psi to fire nails. It is suitable for a number of sidings such as softwood, clapboard, cement, and light gauge steel. The magazine capacity is 300, and the magazine loading type is canister loading. The nailer accommodates nails of lengths ranging between 1-1/4 to 2-1/2 inches. Two firing modes, contact and sequential, are present in the nailer. An adjustable depth feature is also present in the nailer. The body is made of lightweight aluminum. The model comes with a warranty of 7 years.

MAX HN65 Siding Nailer

MAX HN65 is a high-pressure siding nailer that fires both wire and plastic collated nails. It takes nails sized 11/2 to 21/2 inches. The depth control feature is present in the nailer. The depth is adjusted using a dial. The contact nose is replaceable. The nailer is equipped with an anti-double fire mechanism that provides safety to the user. It is light in weight.

Makita AN611 Siding Nailer

Makita AN611 uses siding nails having lengths of 1-1/4 to 2-1/2 inch. It has three firing modes, namely, contact, lock, and sequential. The exhaust port is movable by 360 degrees to direct the exhaust away from the face of the user. The in-built air filter removes debris and dust. The nailer is equipped with 9 depth adjustment settings, which gives a wide range of depths to select—Air pressure generated by the nailer to fire nails range between 65 and 120 psi.

Hitachi NV65AH2 Siding Nailer

Hitachi NV65AH2 is a powerful siding nailer that uses 70-120 psi air pressure to fire nails. The easy-to-load tilt bottom magazine accommodates 200-300 nails at a time—the nailer fires at the rate of 3 nails per second. There are two firing modes offered by the nailer: sequential and contact. There is a selective switch to choose between the two modes. The depth adjustment dial is also present in the nailer. The nail lengths are compatible with the nailer range between 11/2 and 21/2 inch. The nailer has a safety shield to protect the user against debris.

Best scroll saw options to consider

Scroll saw is used to make intricately curved decorative cuts on woodwork. The fine blades of the scroll saw delicately cuts the wood to impart a number of designs. Scroll saw is powered either by electricity or pedal. There are a number of factors such as power, blade type, speed, size, tabletop tilt, etc. which are considered to make a comparison between various models of scroll saws.

The following list of top-rated scroll saws will be helpful for anyone looking for the best scroll saw.

DEWALT DW788 Scroll Saw

DEWALT DW788 is capable of making cuts as deep as 2 inches and even shallow cuts of 0.75 inches. The throat length of the machine is 20 inches, which is enough to accommodate materials of varied sizes. The blades can run at speeds ranging between 400-1750 SPM. 1.3-ampere motor powers the blades. Blade clamp enables swift and easy changing of blades whenever required. The power switch, speed controls, and tension lever are easily accessible.

The solid cast iron construction ensures that the machine is stable. A double parallel-link arm reduces vibrations and noise. The body of the scroll saw bevels 45 degrees towards both left and right.

Dremel MS20-01 Scroll Saw

Dremel MS20-01 is suitable for making precise cuts in several materials such as wood, plastic, metal, and laminates due to its variable speed control feature. The auto-tensioning feature of the tool maintains the blades at the correct tension to make proper cuts, thereby eliminating the need to adjust the blades. Its ergonomically designed handle with a comfortable grip enables good control during cutting operations. The fast clamp base of the tool ensures firm attachment on any surface.

Delta Power Tools 40-694 Scroll Saw

Delta Power Tools 40-694 is well suited for a plethora of cutting operations due to electronically controlled variable speeds ranging between 400 and 1750 SPM. Blade change is fast and easy due to tool-free clamp. The upper arm raises and locks in the raised position during blade changes. The table is made of cast iron, which bevels up to 45 degrees towards both left and right.

The motor powering the blades is of 1.3 amperes. The tool also has dust hose to blow debris from the table and a storage area for blades.

WEN 3920 Scroll Saw

WEN 3920 is capable of making up to 2 inches deep cuts in even hardwoods. A knob is present to control the speed of the blades between 550 and 1600 SPM. The blade holder is compatible with both pinned and pinless blades. The work table is large and bevels up to 45 degrees.

The tool has a flexible LED light and an adjustable air pump to remove debris from the work table. The cast iron base prevents vibration while the foot clamp secures the unit on the surface.

Shop Fox W1713 Scroll Saw

Shop Fox W1713 is powered by 1.2 Amps motor. The blade speed ranges between 550 and 1700 SPM. The tool also has a dust port to collect debris at the bottom and dust blower to remove the debris from cut. The table bevels up to 45 degrees. The adjustable hold-down shoe prevents the wooden piece from rising up due to the force generated by the blades.

Learn about the importance of Wood Lathe

Wood lathes are machines that are used to carve wood into anyone’s desired shape or size; they can range from making a simple dovetail to making bowls or spindles and other decorative carvings or wooden items. In this machine, there is a spinning arm to which a piece of wood is attached, and the wood spins while it is shaped and sized with a variety of different tools. Wood lathes were discovered long back in history, as early as in Egyptian times when their most basic forms were used. They used to be in the form of bow lathes and rope spinners before they became the wood lathes they are today.

Importance of Lathe Machines

The lathe has always been of tremendous importance to the development of civilization. From the simplest wood lathe, many other types of lathes have been developed that are used for metalworking, pottery-making, glass-working, and spinning. The lathe was used in the production of wheels and making parts for many types of furniture and tableware, parts for mills and pumps, jewelry-making, and many other important technological developments.

What Wood Lathes Are Used For

Modern lathes consist of usually one spindle and a tailstock to attach the wood that is to be spun around. Different tools like chisels, tail-rest, and other such varieties are then used to shape the wood into the desired form. You can give it any shape and size it to any size of your choosing. What else you can do is, hollow out the piece of wood to form items like vessels, cups, vases, and other beautiful decorative items. If you know how to use a wood carving lathe machine right, there is a lot you can get out of it.

Advantages of Lathe Machines

These machines are a huge time-saver because they largely cut down on the amount of time it takes to make intricate carvings out of wood like vessels, cups, vases, and other items. Carving wood with a lathe machine assures higher quality and accuracy. Flawless finishes that cannot be achieved by hand-carving can be achieved when using a wood lathe machine to do the job.

Be Aware of the Following before Using a Lathe

  • The spinning parts of the machine can be highly dangerous for inexperienced individuals, or even if you are a little careless while working on them. You have to maintain extreme caution while working with a lathe.
  • Do now wear clothes that are loosely fitted or have hanging parts, so that they don’t have the probability of getting caught in the machine. Also, make sure that the wood is tightly fixed to the spinning part of the machine.
  • A tool you are using can be sent off flying across space if it comes in contact with the spinner, so be very careful of how you are positioning your tool against the lathe and also how you are positioning yourself near the wood lathe machine.
  • Learn thoroughly, how to use the machine before going near it. Wear steel-toed shoes/boots, dust mask, and safety glasses while working on a lathe machine.

Lathe machines can come in handy if you know how to use them right!

What a Wood Planer is & How it Works:

It is often frustrating to order custom thickness of boards from local suppliers of wood. Although table saws can be used to decrease board thickness, then have a jointer clean the edges. But all this hassle can be avoided using a wood planer. Let’s take a look at how these work and in what ways they can be used.

Wood planers are tools used for woodworking that are used for producing even thickness in boards. Traditional wood planers used to be handheld tools, but the modern ones are equipped with a platform to enable quickness and accuracy while planing. These can be either manually controlled or electrically.

First off, the desired cut depth is set by either making adjustments to the cutter head or the platform. Then the machine is switched on. As the board is fed into the planer, the in-feed roller carries it forward while the spinning blades of the drum are seizing it. The sized board comes out of the out-feed roller, making the process of achieving a smooth and sized board, effortless.

Uses of Planers:

Using a wood thickness planer, one can convert irregular wooden pieces into leveled ones as their project requires. This allows people to purchase good quality, but uneven wood from any lumberyard, and then level the wood as well as achieve a certain thickness with the help of a planer. Planers can be helpful for projects that need two edges joined together adjacently. Anyone can do small projects like leveling a door by about 5 degrees, with a little bit of practice. This enables smooth opening and closing of the door with minimal jamming or clicking sounds; the doors have no hinges either.

The flattening feature of wood planers is put to good use when it can even be used to reclaim and revamp old wood. But if you get to talk to a woodwork purist, they will tell you the side-effects of doing this- nicked blades and lost sharpness. Nonetheless, the cost of good quality lumber is growing so fast that recycling old wood seems to be an affordable and cost-effective way to go. And if the same means are only replacing the blades that are carbide-tipped at regular intervals of time, then a lot is saved against the outgoing $30-40!

Training Required for Using a Planer:

Although a wood planer is a great tool to size and smoothen out wooden boards and pieces, it is not everyone’s cup of tea. There can be various things that can go wrong if a novice is using it. Some include tear outs, inclined planes, and snipes on the surface of the board. All this only increases the duration and cost of the project at hand. It is thus, better to know what you’re doing and practice your hand on a few useless and unused boards before moving on to actual projects that are important enough to cost if you mess up.

Factors to be considered while buying Cordless Drill

Cordless drills are power tools that are capable of drilling holes and driving screws. It is a beneficial tool for DIY enthusiasts as well as professionals. These are useful tools for any household and often make great gifts for father’s day! For those who want to buy a cordless drill for their house but don’t know what to look for in one, you’ve come to the right place. Here’s a guide on what factors to consider while buying cordless drills; consider this sort of a buying guide.

  • High voltage

In cordless drilling machines, the more the voltage, the more is the power. Consider what you’ll need them to do while buying a cordless drill. There are light-duty drilling machines available that usually come equipped with a 6V-12V battery that can be used for general household purposes. Medium or general-purpose drills are used for almost all kinds of drilling jobs except the heavy-duty ones; they come with 12V-18V batteries. Heavy-duty ones are used mostly by professionals on construction sites and such other purposes; they contain 18V-24V batteries.

  • Torque

The force that the drill applies on a surface due to its twisting is called its torque. Plastics and such materials are soft and don’t need torque consideration before buying a drill. But for concrete, metal or other hard surfaces, one with higher torque and the lower speed is preferred. For heavy-duty work and drilling, you may want to consider a cordless drill that has a torque of 400+ in-lbs.

  • Brushes

Brushless motors are capable of sensing the resistance to adjust accordingly with the task at hand. This means that the drill will use less power while performing a light job but can draw a larger amount of power while doing a heavy-duty job. This is beneficial because it conserves battery and power usage. These drills are more durable. Compared to brushed motors, these have room to draw more power when needed. They are more useful, more durable, are more efficient and conserve power.

  • Batteries

Look for a place to pop in an extra battery inside you drill because no one wants their tool to die down whilst doing a job! Batteries made of Lithium-ion can run 4 times longer than any regular ones, and their performance is better. Batteries can be powered by using inductive charging points now, which use alternating magnetic fields to serve the purpose. Batteries that change voltage allow the user to run it according to their needs.

  • Speed ranges

There are cordless drills equipped with an ability to control their speeds. 300 RPM is the basic model with a single-speed feature, whereas there are dual speed models that can change between drilling and driving. Moreover, advanced models can also be operated at different speeds.

In addition to all these points, look for drills that have ergonomic or comfortable grips because the grip of your hand on the machine is of utmost importance while working. Good luck with your cordless drill!